Grid View:

COLLET SET 5PC + COLLET NUT

(0)
R187.45

Collet set for thread 8 x 0.75The collet set is used to hold the corresponding shank diameter.Collets included in the set:Ø 1.00mmØ 1.50mmØ 2.35mmØ 3.00mmØ 3.20mmCollet nut included for 8 x 0.75 thread..

COLLET SET 4PC + NUT DREMEL

(0)
R160.37

Collet set for thread 9/32 x 40The collet set is used to hold the corresponding shank diameter.Collets included in the set:Ø 0.80mmØ 2.35mmØ 3.00mmØ 3.20mmCollet nut included for 9/32 x 40 thread..

KEYLESS CHUCK 0.4-3.2MM.TREAD 8X0.75

(0)
R336.32

Keyless chuck for thread 8 x 0.75The keyless chuck is used to hold accessories with a shank diameter between Ø 0.4-3.2mm...

KEYLESS CHUCK 0.4 - 3.2MM DREMEL

(0)
R349.95

Keyless chuck for thread 9/32 x 40The keyless chuck is used to hold accessories with a shank diameter between Ø 0.4-3.2mm...

MINI QUICK CHANGE COLLET KIT 0.8/1.6/2.4/3.2MM

(0)
R52.33

Quick change collet kitThe quick change collet allows you to fit the following collet diameters:Ø 0.8mmØ 1.6mmØ 2.4mmØ 3.2mmMake sure to tighten the collet nut with a collet wrench...

MINI REPLACEMENT COLLET 0.8MM

(0)
R16.10

Replacement collet - Ø 0.8mmThe collet is used to hold mini rotary accessories with a shank diameter of Ø 0.8mm..

MINI REPLACEMENT COLLET 1.6MM

(0)
R16.10

Replacement collet - Ø 1.6mmThe collet is used to hold mini rotary accessories with a shank diameter of Ø 1.6mm..

MINI REPLACEMENT COLLET 3.2MM

(0)
R16.10

Replacement collet - Ø 3.2mmThe collet is used to hold mini rotary accessories with a shank diameter of Ø 3.2mm..

MINI MULTI COLLET NUT FOR 0.8-3.2MM SHANK

(0)
R66.36

Multi chuck - Ø 0.8mm - 3.2mmThe multi chuck is ideal for mini and micro drill bits, to secure hold different diameter accessories from Ø 0.8mm up to Ø 3.2mm..

MINI COLLET WRENCH

(0)
R8.05

Collet wrenchThe collet wrench is used to securely tighten the collet nut or multi chuck, locking the mini rotary accessory in place.The back end of the wrench has a flat tip screwdriver that can be used to change accessories on the mini rotary mandrels...

COLLET 3.2MM FOR TCMT001 MINITOOL

(0)
R24.32

Flexible shaft for TCMT001 rotary toolCollet diameter: Ø3.2mmApplication:The collet is measured on the inside. There are three different collet sizesavailable. The collet size needs to correspond to the shaft diameter of the minitool being used.A drill chuck (TCMT001DC) can also be used to substitute the use of a collet.TCMT001 accessories:TCMT001D..

COLLET 2.3MM FOR TCMT001 MINITOOL

(0)
R24.32

Flexible shaft for TCMT001 rotary toolCollet diameter: Ø2.3mmApplication:The collet is measured on the inside. There are three different collet sizesavailable. The collet size needs to correspond to the shaft diameter of the minitool being used.A drill chuck (TCMT001DC) can also be used to substitute the use of a collet.TCMT001 accessories:TCMT001D..

COLLET 1.6MM FOR TCMT001 MINITOOL

(0)
R24.32

Flexible shaft for TCMT001 rotary toolCollet diameter: Ø1.6mmApplication:The collet is measured on the inside. There are three different collet sizesavailable. The collet size needs to correspond to the shaft diameter of the minitool being used.A drill chuck (TCMT001DC) can also be used to substitute the use of a collet.TCMT001 accessories:TCMT001D..

DRILL CHUCK 0-3.2MM FOR TCMT001

(0)
R98.84

Chuck for TCMT001 rotary toolApplication:The chuck is used to replace the collet clamping system of the TCMT001 rotarytool. The clamping range is Ø0.3-3.2mm.TCMT001 accessories:TCMT001DCDrill chuck 0-3.2mmTCMT001FSFlexible shaftTCMT001SSTelescopic hanging hook stand with desk clampTCMT001-2-3-1Collet with nut 3.2mmTCMT001-2-3-2Collet with nut 2.3mm..

Showing 1 to 14 of 14 (1 Pages)